Sorry if i posted this twice, something seemed to go wrong the first time
While im fairly sure others have tried making (and likely made better) ATM scripts, i wanted to try it for myself.
IT IS NOT VERY SECURE NOR RELAIBLE
There are definately lots of room for improvements but here it is:
To build an ATM:
--Helpfull ASCII image
S = Stairs
D = Dispenser
C = Computer
H = Hopper
M = Modem
Level 1
S S S
S D S
S S S
Level 2
H C M
1. Place a computer down 1 block above ground
2. Place a despenser down below the computer facing the front
3. Place a wireless modem on the computers right side
4. Place a hopper faceing down to the left of the computer
5. [recomended] place stairs arround the dispenser, including infront of it
To setup the ATM:
1. run "pastebin get i7CTTzCx startup"
2. run "id" on the server computer.
3. edit startup
4. change line 9 to the correct computer ID (not this computers ID, the server computers ID)
5. save
6. reboot
To build the server:
1. Place down a computer
2. Place a modem ontop of the computer
To setup the server
1. enter "pastebin run CyZwiHR8"
2. reboot
I was just wondering how am I supposed to get the stuff that is deposited(in the hopper) back to the dispenser? Because when I try to do that it seems to be giving a error. What I did was putting a hopper under the other hopper going straight into the dispenser.
EDIT: Never mind I got it working (by accident)